|
The Colormaster can be operated with only
one hand. It has a swivel head so getting
measurements is comfortable and the results
professional. The light sensor itself is made
of three silicon photocells with special
filters. The Colormaster's simple, push button
operation makes getting readings a snap. All
the photographer needs to do is press a single
button and the meter measures the color
temperature and displays the appropriate light
balancing filter and color correction filter
values.
The Colormaster 3f can display light
balancing filter values ranging from -399 to
475 mired. If the user desires, there is a
switch to change from mired to Kodak Wratten
numbers. Color correction filter values are
displayed from 0 to 95 in green and
magenta.
This color meter allows the photographer to
preselect the color temperature of the film
being used in either standard types or
intermediate values. The preset values are
continuously displayed on the Colormaster 3F's
large, easy to read screen.
The Colormaster 3F's ability to measure various
sources of light accurately make it great for
use either in the studio or outside. It easily
measures daylight, fluorescent tubes,
incandescent or halogen light precisely so that
the subtle differences in color temperature can
be analyzed. The meter also allows the
photographer to preselect sync speeds for flash
light from in all speeds 1/500 to 1/2 of a
second. The meter will even measure sync speeds
at 1/90 of a second! The Colormaster will
display flash power using Lux/seconds and the
intensity of ambient light in Lux.
The color meter has an automatic shut off after
two minutes of inactivity. But don't worry, it
will store all presets and readings taken in
its memory after shut off. So that you can be
sure that the meter won't out of power in the
middle of a shoot, it has an automatic battery
check that displays the power remaining, so
you'll always know when you need to bring an
extra 9V battery along.
The Colormaster 3F comes with a second
diffuser. The second diffuser extends the range
of measurements the Colormaster is able to take
for both strong continuous ambient light and
powerful flash. With the diffuser, the meter is
able to measure up to 190,000 Lux and 280,000
Lux/seconds.
The Gossen Colormaster 3F is a must for
professional photographers. Using it will allow
them to select the proper filters needed to get
the perfect picture with the most accurate
color reproduction. Its simple operation
combined with its wide range (especially when
using the second diffuser), means getting the
best photo possible isn't an impossibility.
|